2023 Valid 350-401 Dumps for Helping Passing Cisco Exam!
Download Free Cisco 350-401 Exam Questions & Answer
NEW QUESTION # 294
Drag and drop the characteristics from the left onto the deployment models on the right.
Answer:
Explanation:
NEW QUESTION # 295
Drag and drop the characteristic from the left onto the orchestration tools that they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 296
Refer to the exhibit.
An engineer must block all traffic from a router to its directly connected subnet 209.165.200.0/24. The engineer applies access control list EGRESS in the outbound direction on the GigabitEthernet0/0 interface of the router However, the router can still ping hosts on the 209.165.200.0/24 subnet. Which explanation of this behavior is true?
- A. Only standard access control lists can block traffic from a source IP address.
- B. Access control lists that are applied outbound to a router interface do not affect traffic that is sourced from the router.
- C. The access control list must contain an explicit deny to block traffic from the router.
- D. After an access control list is applied to an interface, that interface must be shut and no shut for the access control list to take effect.
Answer: B
NEW QUESTION # 297
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
NEW QUESTION # 298
Drag and drop characteristics of PIM dense mode from the left to the right.
Answer:
Explanation:
Reference:
PIM dense mode (PIM-DM) uses a push model to flood multicast traffic to every corner of the network. This push model is a brute-force method of delivering data to the receivers. This method would be efficient in certain deployments in which there are active receivers on every subnet in the network. PIM-DM initially floods multicast traffic throughout the network. Routers that have no downstream neighbors prune the unwanted traffic. This process repeats every 3 minutes.
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
In PIM dense mode (PIM-DM), multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
NEW QUESTION # 299
An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the must be the active HSRP router. The peer router has been configured using the default priority value.
Which command set is required?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: B
NEW QUESTION # 300
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
Explanation
Diagram Description automatically generated
NEW QUESTION # 301
Drag and drop the characteristics from the left onto the routing protocols they describe on the right
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 302
In a Cisco SD-Access wireless architecture which device manages endpoint ID to edge node bindings?
- A. fabric control plane node
- B. fabric border node
- C. fabric wireless controller
- D. fabric edge node
Answer: A
Explanation:
Explanation
SD-Access Wireless Architecture Control Plane Node -A Closer Look
Fabric Control-Plane Node is based on a LISP Map Server / Resolver
Runs the LISP Endpoint ID Database to provide overlay reachability information
+ A simple Host Database, that tracks Endpoint ID to Edge Node bindings (RLOCs)+ Host Database supports multiple types of Endpoint ID (EID), such as IPv4 /32, IPv6 /128* or MAC/48+ Receives prefix registrations from Edge Nodes for wired clients, and from Fabric mode WLCs for wireless clients+ Resolves lookup requests from FE to locate Endpoints+ Updates Fabric Edge nodes, Border nodes with wireless client mobility and RLOC information
NEW QUESTION # 303
Refer to the exhibit. Which command set completes the ERSPAN session configuration?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: C
NEW QUESTION # 304
Drag and drop the characteristics from the left onto the infrastructure types on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 305
Refer io me exhibit.
An engineer configures the trunk and proceeds to configure an ESPAN session to monitor VLANs10. 20. and 30. Which command must be added to complete this configuration?
- A. Device(config.mon-erspan.Src-dst)# mtu 1460
- B. Device(config.mon.erspan.stc)# no filter vlan 30
- C. Devic(config.mon.erspan.src-dst)# no vrf 1
- D. Devic(config.mon.erspan.src-dst)# erspan id 6
Answer: B
NEW QUESTION # 306
Which DHCP option provides the CAPWAP APs with the address of the wireless controller(s)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION # 307
An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?
- A. standby 10 ip 172.16.13.254
standby 10 priority 120 - B. vrrp group 10 ip 172.16.13 254.255.255.255.0
vrrp group 10 priority 120 - C. vrrp 10 ip 172.16.13.254
vrrp 10 preempt - D. standby 10 ip 172.16.13.254 255.255.255.0
standby 10 preempt
Answer: B
Explanation:
NEW QUESTION # 308
Which LISP device is responsible for publishing EID-to-RLOC mappings for a site?
- A. MR
- B. MS
- C. ITR
- D. ETR
Answer: D
Explanation:
An Egress Tunnel Router (ETR) connects a site to the LISP-capable part of a core network (such as
the Internet), publishes EID-to-RLOC mappings for the site, responds to Map-Request messages,
and decapsulates and delivers LISP-encapsulated user data to end systems at the site.
Reference:
3s/irl-xe-3s-book/irl-overview.html
NEW QUESTION # 309
......
350-401 Exam Dumps For Certification Exam Preparation: https://certblaster.prep4away.com/Cisco-certification/braindumps.350-401.ete.file.html