Pass NACE NACE-CIP2-001 Exam in First Attempt Guaranteed [Mar-2024]
Exam Sure Pass NACE Certification with NACE-CIP2-001 exam questions
NACE-CIP2-001 (Coating Inspector Level 2) Certification Exam is designed to test the knowledge and skills of individuals who are involved in the inspection and quality control of protective coatings. Coating Inspector Level 2 certification is offered by the National Association of Corrosion Engineers (NACE), which is a globally recognized organization that provides training and certification programs in the field of corrosion prevention.
NEW QUESTION # 29
Centrifugal blast cleaning requires:
- A. The use of single use abrasives
- B. Very large nozzles
- C. A large volume of air to propel the abrasive
- D. Well maintained blast wheels
Answer: D
NEW QUESTION # 30
Surface preparation of concrete is performed using:
- A. Methods that are exactly the same as steel
- B. Methods that are completely different to steel
- C. Methods that are the same as wood
- D. Methods that have been modified for concrete
Answer: D
NEW QUESTION # 31
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. run through the air wash separator.
- B. mixed with uncontaminated abrasive
- C. disposed of properly.
- D. washed with clean potable water prior to Use.
Answer: C
NEW QUESTION # 32
Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:
- A. Conductive coatings applied to a cementitious substrate
- B. Non-Conductive coatings applied to a conductive metallic substrate
- C. Conductive coatings applied to a magnetic metallic substrate
- D. Magnetic coatings applied to a magnetic metallic substrate
Answer: B
NEW QUESTION # 33
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Challenge the supervisor's authority
- B. Defend the previous inspector
- C. Suggest to the Owner that the supervisor should be removed from site
- D. Express a willingness to work with the site team and follow the specification
Answer: D
NEW QUESTION # 34
All of these are advantages of using repair patches EXCEPT
- A. inert to common acids, alkalis, and solvents.
- B. excellent abrasion resistance.
- C. barrier to moisture and corrosion.
- D. special tools or equipment are required.
Answer: D
NEW QUESTION # 35
You are the NACY Coating Inspector on a tank lining project where desiccant dehumidification is being used. Since the first shift of abrasive blasting your readings have indicated relative humidity below 40%; however on the second shift of coating application your readings are indicting 80%.
Your FIRST preferred course of action is to:
- A. Advise the coating applicator supervisor of your readings
- B. Document the readings at the end of the shift
- C. Check to See if the dehumidification equipment is operating correctly
- D. Call your supervisor
Answer: A
NEW QUESTION # 36
Inspection and Test plans are developed by referencing:
- A. The Specification, Safety Manual, Relevant Standards and Codes
- B. The Specification, SDS, relevant Standards and Codes
- C. The Specification, Application Guidelines, 'Relevant Standards and Codes
- D. The Specification, TDS, relevant Standards and Codes
Answer: D
NEW QUESTION # 37
NACE International Standards are developed by:
- A. Regional mandates
- B. Standard committees
- C. Government mandates
- D. International mandates
Answer: B
NEW QUESTION # 38
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Iron content
- B. Safety
- C. Appearance
- D. Cost
Answer: A
NEW QUESTION # 39
Antifouling coatings are regulated by international treaties.
- A. False
- B. True
Answer: B
NEW QUESTION # 40
Surface preparation methods for Non-ferrous metals are:
- A. The same as for Ferrous metals
- B. The same for all Non-FetT0us metals
- C. Specific for each type of Non-ferrous metal
- D. Not required
Answer: C
NEW QUESTION # 41
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Midstream
- B. Distribution
- C. Transmission
- D. Gathering
Answer: B
NEW QUESTION # 42
You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:
- A. Use a generally accepted industry standard and to take readings
- B. Refuse to take readings until an is in place
- C. Develop your own methodology and proceed take the readings
- D. Call your supervisor
Answer: A
NEW QUESTION # 43
Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?
- A. Stoning
- B. Sacking
- C. High-pressure water washing
- D. Acid etching
Answer: D
NEW QUESTION # 44
You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner's representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?
- A. SP 1 followed by SP 2
- B. SP 1 followed by SP 3
- C. SP 1 followed by caustic etching
- D. SP 1 followed by acid etching
Answer: A
NEW QUESTION # 45
Dehumidification is defined as the removal of moisture vapor from the air to
- A. lower its dew point,
- B. provide worker comfort.
- C. lower its temperature
- D. raise its relative humidity.
Answer: A
NEW QUESTION # 46
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. Different than air blast cleaning
- B. Slightly different to air blast cleaning
- C. Comparable to air blast cleaning
- D. The same as air blast cleaning
Answer: D
NEW QUESTION # 47
......
Real NACE NACE-CIP2-001 Exam Questions Study Guide: https://certblaster.prep4away.com/NACE-certification/braindumps.NACE-CIP2-001.ete.file.html