Oct-2024 Pass Your 300-730 Exam at the First Try with 100% Real Exam
Get Real Exam Questions for 300-730 with New Questions
Cisco 300-730 exam is a comprehensive and challenging certification exam that requires a significant amount of preparation and study. IT professionals who successfully pass the exam will gain a competitive advantage in the job market and be recognized as experts in VPN implementation and network security. 300-730 exam can be taken at any Pearson VUE testing center around the world, and candidates must pass with a score of 825 out of 1000 to earn the CCNP Security certification.
Cisco 300-730 exam covers a broad range of topics related to VPN security, including the design and deployment of VPN solutions, the configuration of VPN tunnels, and the troubleshooting of VPN connectivity issues. 300-730 exam also covers various security protocols, such as IPsec, SSL/TLS, and DTLS, and their associated encryption, authentication, and access control mechanisms. To pass the exam, candidates must demonstrate their ability to implement secure VPN solutions using Cisco technologies and protocols, and must be able to troubleshoot common VPN connectivity issues. Overall, the Cisco 300-730 exam is a comprehensive test that measures the ability of IT professionals to implement and manage VPN security solutions in today's complex network environments.
NEW QUESTION # 49
Refer to the exhibit.
Which type of Cisco VPN is shown for group Cisc012345678?
- A. GETVPN
- B. Clientless SSLVPN
- C. Cisco AnyConnect Client VPN
- D. DMVPN
Answer: C
NEW QUESTION # 50
Users cannot log in to a Cisco ASA using clientless SSLVPN. Troubleshooting reveals the error message "WebVPN session terminated: Client type not supported". Which step does the administrator take to resolve this issue?
- A. Enable the Cisco AnyConnect premium license on the Cisco ASA.
- B. Increase the simultaneous logins on the group policy.
- C. Have the user upgrade to a supported browser.
- D. Enable the clientless VPN protocol on the group policy.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/webvpn-ssl-vpn/119417-config-asa-
00.html#anc15
NEW QUESTION # 51
A network engineer is configuring a server. The router will terminate encrypted VPN connections on g0/0, which is in the VRF "Internet". The clear-text traffic that must be encrypted before being sent out traverses g0/1, which is in the VRF "Internal". Which two VRF-specific configurations allow VPN traffic to traverse the VRF-aware interfaces? (Choose two.)
- A. Under the IKEv2 profile, add the match fvrf Internal command.
- B. Under the virtual-template interface, add the tunnel vrf Internet command.
- C. Under the virtual-template interface, add the ip vrf forwarding Internet command.
- D. Under the IKEv2 profile, add the match fvrf Internet command.
- E. Under the IKEv2 profile, add the ivrf Internal command.
Answer: C,D
NEW QUESTION # 52
Refer to the exhibit. Given the output of the show ip route command, which remote access VPN technology is in use?
- A. FlexVPN
- B. Reverse Route Injection
- C. Dynamic Crypto Map
- D. DMVPN
Answer: A
NEW QUESTION # 53
A DMVPN spoke router tunnel is up and passing traffic, but it cannot establish an EIGRP neighbor relationship with the hub router. Which solution resolves this issue?
- A. Enable the EIGRP next hop self feature on the hub tunnel interface.
- B. Enable EIGRP Split Horizon on the hub tunnel interface.
- C. Configure the dynamic NHRP multicast map on the hub tunnel interface.
- D. Remove the EIGRP stub configuration on the spoke tunnel interface.
Answer: C
Explanation:
DMVPN is an NBMA network, which doesn't support multicast at all. The only reason we can get it working to the hub is because of the nhrp multicast command we add to the tunnel interface.
NEW QUESTION # 54
What are two functions of ECDH and ECDSA? (Choose two.)
- A. encryption
- B. key exchange
- C. digital signature
- D. nonrepudiation
- E. revocation
Answer: B,C
Explanation:
Reference:
https://tools.cisco.com/security/center/resources/next_generation_cryptography
NEW QUESTION # 55
Which technology works with IPsec stateful failover?
- A. HSRP
- B. GLBR
- C. VRRP
- D. GRE
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512
NEW QUESTION # 56
Refer to the exhibit. The DMVPN spoke is not establishing a session with the hub. Which two actions resolve this issue? (Choose two.)
- A. Change the ISAKMP key address on the spoke to 0.0.0.0.
- B. Change the spoke nhs to 172.16.18.1 and the nbma to 10.0.0.1.
- C. Change the nhrp authentication key on the spoke to cisco123.
- D. Change the ISAKMP policy authentication on the spoke to pre-shared.
- E. Change the transform set to mode tunnel.
Answer: C,D
NEW QUESTION # 57
Refer to the exhibit.
Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)
- A. FlexVPN
- B. VTI
- C. crypto map
- D. DMVPN
- E. GRE
Answer: B,D
NEW QUESTION # 58 
Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile.
When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. UserGroup must match connection profile.
- B. Primary protocol should be SSL.
- C. The HostName is incorrect.
- D. The IP address is incorrect.
Answer: A
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION # 59
Which technology works with IPsec stateful failover?
- A. HSRP
- B. GLBR
- C. VRRP
- D. GRE
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ft_vpnha.html#wp
1122512
NEW QUESTION # 60
Refer to the exhibit.
An engineer is diagnosing an issue that occurred after a router at a branch site was assigned a new address. Based on the debugs, what must be done to resolve this issue?
- A. Ensure that the correct preshared keys are set on both sides.
- B. Add the remote peer's identity to the server's IKEv2 profile.
- C. Add the remote peer's IP address to the server's IKEv2 keyring.
- D. Ensure that the UDP 500 packets between devices are not dropped.
Answer: B
NEW QUESTION # 61
Refer to the exhibit.
A network engineer is configuring a remote access SSLVPN and is unable to complete the connection using local credentials. What must be done to remediate this problem?
- A. Configure a AAA server group to authenticate the client.
- B. Change the authentication method to local.
- C. Enable the client protocol in the Cisco AnyConnect profile.
- D. Configure the group policy to force local authentication.
Answer: C
NEW QUESTION # 62
Refer to the exhibit.
The network administrator must allow the Cisco AnyConnect Secure Mobility Client to securely access the corporate resources via IKEv2 and print locally. Traffic that is destined for the Internet must still be tunneled to the Cisco ASA.
Which configuration does the administrator use to accomplish this goal?
- A. Split exclude policy with a deny for 192.168.0.3/32.
- B. Tunnel all policy.
- C. Split exclude policy with a permit for 0.0.0.0/32.
- D. Split include policy with a permit for 192.168.0.0/24.
Answer: C
NEW QUESTION # 63
A network administrator is deploying a Cisco IPS appliance and needs it to operate initially without affecting traffic flows. It must also collect data to provide a baseline of unwanted traffic before being reconfigured to drop it. Which Cisco IPS mode meets these requirements?
- A. inline tap
- B. bypass
- C. promiscuous
- D. failsafe
Answer: C
Explanation:
A) failsafe mode is a feature that determines how the appliance behaves when a hardware or software failure occurs. It does not affect the normal traffic flow or analysis3. B. inline tap mode is a variation of inline mode that allows the appliance to pass traffic without inspection in case of a power failure or a software crash. It does not allow the appliance to collect data without affecting traffic4. D. bypass mode is a feature that enables the appliance to bypass traffic without inspection when it is overloaded or under maintenance. It does not allow the appliance to analyze traffic and generate alerts.
1: How the Sensor Functions 2: Cisco ASA IPS Module Quick Start Guide 3: Failsafe Mode 4: Inline Tap Mode : Bypass Mode Explanation:
The correct answer is C. promiscuous mode. In promiscuous mode, the Cisco IPS appliance operates as a passive device that monitors a copy of the network traffic and analyzes it for malicious activity. The appliance does not affect the traffic flow, but it can generate alerts, logs, and reports based on the configured security policy. Promiscuous mode is useful for initial deployment and baseline analysis, as well as for monitoring low-risk segments of the network12.
NEW QUESTION # 64
A network engineer is implementing a FlexVPN tunnel between two Cisco IOS routers. The FlexVPN tunnels will terminate on encrypted traffic on an interface configured with an IP MTU of 1500, and the company has a security policy to drop fragmented traffic coming into or leaving the network. The tunnel will be used to transfer TFTP data between users and internal servers. When the TFTP traffic is not traversing a VPN, it can have a maximum IP packet size of 1500. Assuming the encrypted payload will add 90 bytes, which configuration allows TFTP traffic to traverse the FlexVPN tunnel without being dropped?
- A. Set the tunnel IP MTU to 1500.
- B. Set the tunnel IP MTU to 1400.
- C. Set the tunnel tcp adjust-mss to 1460.
- D. Set the tunnel tcp adjust-mss to 1360.
Answer: D
NEW QUESTION # 65
-
Drag and drop the GET VPN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 66
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show crypto ipsec sa
- B. show crypto isakmp sa
- C. show dmvpn detail
- D. show ip traffic
- E. show ip nhrp traffic
Answer: C,E
Explanation:
Ipsec tunnel is up so we don't need to troubleshoot that (so we don't need option A and C here) Option B (show ip traffic) is totally unrelated here.
This leave us with D and E which are indeed both helping us to troubleshoot DMVPN NHRP registration process.
NEW QUESTION # 67
Refer to the exhibit.
Based on the debug output, which type of mismatch is preventing the VPN from coming up?
- A. preshared key
- B. lifetime
- C. interesting traffic
- D. PFS
Answer: B
Explanation:
If the responder's policy does not allow it to accept any part of the proposed Traffic Selectors, it responds with a TS_UNACCEPTABLE Notify message.
NEW QUESTION # 68
Refer to the exhibit.
Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA. Which command on the ASA is missing?
- A. dns-server value 10.1.1.3
- B. same-security-traffic permit intra-interface
- C. same-security-traffic permit inter-interface
- D. dns-server value 10.1.1.2
Answer: B
Explanation:
The same-security-traffic intra-interface command lets traffic enter and exit the same interface, which is normally not allowed. This feature might be useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection. For example, if you have a hub and spoke VPN network, where the security appliance is the hub, and remote VPN networks are spokes, for one spoke to communicate with another spoke, traffic must go into the security appliance and then out again to the other spoke.
NEW QUESTION # 69
Which two types of web resources or protocols are enabled by default on the Cisco ASA Clientless SSL VPN portal? (Choose two.)
- A. RDP
- B. HTTP
- C. ICA (Citrix)
- D. VNC
- E. CIFS
Answer: A,E
NEW QUESTION # 70
An engineer is implementing the FlexVPN solution on a Cisco IOS router. The router must only terminate VPN requests and must not initiate them. Additionally, the interface must support VPNs from other routers and Cisco AnyConnect connections. Which interface type must be configured to meet these requirements?
- A. virtual template interface
- B. multipoint GRE tunnel interface
- C. static virtual tunnel interface
- D. point-to-point GRE tunnel interface
Answer: A
Explanation:
The correct interface type to meet these requirements is the virtual template interface. This interface allows for the creation of multiple virtual access interfaces, which can be used for various types of remote access VPN connections, including site-to-site and AnyConnect VPNs. The virtual template interface can be configured to terminate VPN requests from other routers and allow for dynamic creation of VPN sessions, while also supporting AnyConnect VPN connections.
NEW QUESTION # 71
Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)
- A. AnyConnect Backup Servers
- B. AnyConnect Always On
- C. ASA failover
- D. AnyConnect Auto Reconnect
- E. AnyConnect Network Access Manager
Answer: A,C
NEW QUESTION # 72
An engineer is using DMVPN to provide secure connectivity between a data center and remote sites. Which two routing protocols should be used between the routers? (Choose two.)
- A. IS-IS
- B. RIPv2
- C. OSPF
- D. BGP
- E. EIGRP
Answer: D,E
NEW QUESTION # 73
Refer to the exhibit.
A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the syslog message, which action brings up the VPN tunnel?
- A. Correct the crypto access list on both Cisco ASA devices.
- B. Remove the maximum SA limit on the remote Cisco ASA.
- C. Reduce the maximum SA limit on the local Cisco ASA.
- D. Increase the maximum in-negotiation SA limit on the local Cisco ASA.
Answer: D
NEW QUESTION # 74
......
Updated 300-730 Certification Exam Sample Questions: https://certblaster.prep4away.com/Cisco-certification/braindumps.300-730.ete.file.html