[Dec-2025] The Nutanix NCP-MCI-6.10 Exam Test For Brief Preparation
Revolutionary Guide To Exam Nutanix Dumps
Nutanix NCP-MCI-6.10 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 14
Whichtwo URLs must be accessiblefrom aConnected Site's Controller VMsto allowLife Cycle Manager (LCM) to download software updates?
- A. download.nutanix.com
- B. release-api.nutanix.com
- C. portal.nutanix.com
- D. mynutanix.com
Answer: A,B
Explanation:
LCM (Life Cycle Manager) fetches software updates from Nutanix's repositories, requiring access to specific URLs.
* Option A (download.nutanix.com) is correct:
* This domainhosts all software update filesfor AOS, AHV, and other Nutanix components.
* Option C (release-api.nutanix.com) is correct:
* This domain is used forLCM to fetch update metadataand check for new versions.
* Option B (mynutanix.com) is incorrect:
* This domain is used foraccount management, not LCM updates.
* Option D (portal.nutanix.com) is incorrect:
* TheNutanix support portal is not used for automated LCM updates.
References:
* Nutanix LCM Guide#Firewall Rules for LCM Connectivity
* Nutanix KB#Troubleshooting LCM Update Failures
NEW QUESTION # 15
What would cause an LCM pre-check event with the test_esx_entering_mm_pinned_vms check during an AOS upgrade?
- A. VMs on the host have high CPU usage.
- B. Host has insufficient memory.
- C. HA priority settings are misconfigured.
- D. Affinity rules are configured to prevent VM migration.
Answer: D
Explanation:
The test_esx_entering_mm_pinned_vms check in an AOS upgrade validates whether there are any pinned VMs on ESXi hosts, which could prevent host maintenance mode transitions.
From theNutanix Enterprise Cloud Administration (ECA)course materials:
"Affinity or anti-affinity rules that pin VMs to specific hosts prevent those VMs from migrating during host maintenance mode entry. This directly triggers a failure in the LCM precheck test_esx_entering_mm_pinned_vms check."
NEW QUESTION # 16
Which predefined view in Prism Central's Intelligent Operations should be used to determine which VM is consuming excessive resources and causing performance issues for others?
- A. Overprovisioned VMs List
- B. Bully VMs List
- C. Inactive VMs List
- D. Constrained VMs List
Answer: B
Explanation:
TheBully VMs List (Option C)in Prism Central'sIntelligent OperationsidentifiesVMs consuming excessive CPU, memory, or storage, which negatively affects other VMs.
* Option A (Inactive VMs List)is used foridentifying unused VMsbut does not detect performance issues.
* Option B (Overprovisioned VMs List)helps identifyVMs with excessive allocated resources, but it does not focus on live performance impact.
* Option D (Constrained VMs List)highlightsVMs suffering from resource contention, not those causing it.
References:
* Nutanix Prism Central #Intelligent Operations and Performance Tuning
* Nutanix KB #Identifying and Managing Resource-Hogging VMs
NEW QUESTION # 17
An administrator isprotecting an application and its datastored onVolume GroupsusingProtection Domains.
Duringfailover tests, allapplication VMs restore successfully, but theapplication data is completely missing.
How can the Protection Domain configuration be adjusted to avoid this issue in the future? (Choose two.)
- A. Select the "Auto protect related entities" checkbox.
- B. Place Volume Groups in a separate Protection Domain.
- C. Manually add Volume Groups to Protected Entities.
- D. Use application-consistent snapshots.
Answer: A,C
Explanation:
Protection Domains (PDs) in Nutanix ensure that entire applications and their associated data are protected during failover.However,Volume Groups (VGs) are not automatically includedunless explicitly configured.
* Option A (Select "Auto protect related entities") is correct:
* This setting ensures thatassociated Volume Groups, networks, and other dependencies are included in the Protection Domainautomatically.
* Without enabling this, only the VM itself would be protected, leading tomissing application data upon failover.
* Option B (Manually add Volume Groups to Protected Entities) is correct:
* If"Auto protect related entities" is not enabled, the administrator mustmanually add Volume Groups to the Protection Domain.
* This ensures that bothVMs and their attached Volume Groupsare replicated and recovered together.
* Option C (Place Volume Groups in a separate Protection Domain) is incorrect:
* Separating Volume Groups into a different PDdoes not guarantee they failover together with VMs.
* It is best practice tokeep related VMs and Volume Groups in the same PD.
* Option D (Use application-consistent snapshots) is incorrect:
* Whileapplication-consistent snapshots improve data integrity, theydo not fix missing Volume Groups in failover scenarios.
References:
* Nutanix Disaster Recovery Guide#Protection Domain Configuration and Volume Groups
* Nutanix KB#Ensuring Volume Groups Are Included in Disaster Recovery Failovers
NEW QUESTION # 18
An administrator using adark site deployment for LCMis attempting toupgrade to the latest BIOS.
After completing aninventory scan, the administrator doesnot see the expected BIOS versionavailable for upgrade.
What is the most likely reason the latest BIOS is not shown?
- A. The latest compatibility bundle has not been uploaded.
- B. The BMC version needs to be upgraded first.
- C. AOS needs to be upgraded first.
- D. The dark site webserver is not accessible.
Answer: A
Explanation:
In a dark site deployment, LCM does not automatically fetch updates from the internet. The administrator must manually upload compatibility bundles.
* Option B (The latest compatibility bundle has not been uploaded) is correct:
* Thecompatibility bundlecontainsfirmware mappings, allowing LCM to detect the correct BIOS version.
* Option A is incorrect:
* AOSdoes not need to be upgraded firstfor a BIOS update.
* Option C is incorrect:
* TheBMC firmware does not always need updatingbefore BIOS updates.
* Option D is incorrect:
* In a dark site deployment,LCM does not rely on an internet connection, so webserver access is not required.
References:
* Nutanix LCM Guide#Using Compatibility Bundles in Dark Sites
* Nutanix KB#Troubleshooting Firmware Updates in Dark Site Deployments
NEW QUESTION # 19
Refer to Exhibit:
An administrator notices the message shown in the exhibit when navigating to LCM from Prism Central.
Which action should the administrator take to update LCM to the latest version?
- A. Perform anInventory Scan.
- B. Download and install the latest LCM version from a CVM.
- C. Run anAHV upgrade.
- D. Run anAOS upgrade.
Answer: A
Explanation:
When Life Cycle Manager (LCM) reports thata newer framework version is available, thecorrect actionis toperform an inventory scan (Option C).
Performing an inventory scan updates the available firmware/software versionsand allows LCM to download required updates.
Option A (Run an AOS upgrade)is unrelated to the LCM framework update process.
Option B (Run an AHV upgrade)is a separate component update and does not affect the LCM framework.
Option D (Download manually from a CVM)is not necessary because LCM updates are automatically pulled after an inventory scan.
References:
Nutanix LCM User Guide #Updating LCM Framework and Performing Inventory Scans Nutanix KB #Best Practices for LCM Updates Nutanix Prism Central #LCM Update Workflow
NEW QUESTION # 20
An administrator is executing a storage performance test between two Microsoft Windows VMs. The first VM was deployed by using a template, while the second one was created from scratch.
Results show that VMs have very different metrics when using the same performance test. The first VM reaches 8000 IOPS, while the second struggles reaching 500/800 IOPS. Currently the AHV cluster is not under pressure.
How can the administrator determine why these results were produced?
- A. Verify both VMs have installed Nutanix Guest Tools.
- B. Compare vDisk bus type between VMs.
- C. Check number of VCPUs assigned to VMs
- D. Enable AHV Turbo on the second VM.
Answer: B
NEW QUESTION # 21
An administrator is trying to configure Metro Availability between Nutanix ESXi-based clusters. However, the Compatible Remote Sitesscreen does not list all required storage containers.
Which two reasons could be a cause for this issue? (Choose two.)
- A. The destination storage container is not empty.
- B. The remote site storage container has compression enabled.
- C. Both storage containers must have the same name.
- D. Source and destination hardware are from different vendors.
Answer: A,C
Explanation:
ForMetro Availability to work properly, the storage containers at both the primary and secondary sites must meet certain requirements:
* The storage containers must have the same name(Option D). This ensures that replication and failover work seamlessly. If the names do not match, the storage containers will not be listed as compatible.
* The destination storage container must be empty(Option C). Metro Availability requires a clean storage container at the secondary site to receive data. If the container already contains data, it cannot be used.
* Option A is incorrect: Different vendor hardware does not affect Metro Availability compatibility.
* Option B is incorrect: Compression does not affect Metro Availability compatibility. However, it is recommended to keep compression settings aligned between sites.
References:
* Nutanix Documentation: Metro Availability Deployment Guide
* Nutanix Best Practices for Metro Availability
* Nutanix KB 2093: Troubleshooting Metro Availability Storage Container Issues
NEW QUESTION # 22
An administrator is configuring areplication scheduleonmultiple remote locationsdeployed using asingle- node cluster. The goal is to achieve thelowest possible RPO (Recovery Point Objective).
How should the administrator configure the replication schedule?
- A. Configure NearSync replication.
- B. Configure a schedule for 1 minute up to 15 minutes.
- C. Configure Async replication.
- D. Configure a schedule for 16 minutes up to 59 minutes.
Answer: B
Explanation:
Nutanix NearSync replication provides the lowest RPO (as low as 1 minute) and is the best option for minimizing data loss in DR scenarios.
* Option D (Configure a schedule for 1 minute up to 15 minutes) is correct:
* NearSyncallows anRPO as low as 1 minute, providingnear-continuous data protection.
* This isideal for mission-critical applicationswhere minimal data loss is required.
* Option A (Configure NearSync) is incorrect:
* WhileNearSync is the best choice,just enabling it is not enough-the schedule must be set to1-
15 minutes.
* Option B (16 to 59 minutes) is incorrect:
* NearSync operates within a 1-15 minute range. If set above 15 minutes,it defaults to Async replication.
* Option C (Async replication) is incorrect:
* Async replication typically has an RPO of 1 hour or more, which does not meet thelowest RPO requirement.
References:
* Nutanix Protection Policies Guide#NearSync vs. Async Replication
* Nutanix Bible#RPO and RTO in Disaster Recovery
* Nutanix KB#Configuring NearSync Replication for Single-Node Clusters
NEW QUESTION # 23
Refer to Exhibit:
An administrator is looking at thememory cluster runway diagramas shown in exhibit, in Prism Central. The environment hasthree hostswith the following configuration:
* CPU: 2x Intel Xeon Gold (8 cores, 2.6 GHz)
* RAM: 256 GB per host
* Storage: SSDs and HDDs
TheIntelligent Operations featurehas been active forone month, but no further configurations were applied.
What does the dotted red line mean?
- A. It is thecalculated memory oversubscription limitfor currently running VMs.
- B. It is theusable capacity based on cluster configuration options.
- C. It is thedefault trend analysis static thresholdthat can be manually set.
- D. It is themaximum memory the administrator can assign to VMs.
Answer: A
NEW QUESTION # 24
An administrator has been tasked with performing firmware upgrades for all their Nutanix sites.
When attempting to perform firmware upgrades via Life Cycle Manager (LCM) at a remote site with a single- node cluster deployed, no firmware updates are listed as being available. The administrator confirmed the currently installed firmware is several revisions behind.
Why are there no firmware upgrades listed in LCM for this cluster?
- A. LCM cannot perform firmware upgrades on single-node clusters.
- B. Single-node clusters only support one-click firmware upgrades.
- C. LCM is not supported on single-node clusters.
- D. LCM does not have access to the internet.
Answer: A
Explanation:
Nutanix LCM architecture supports firmware, BIOS, BMC, disk controller, and drive updates only when the environment includes multiple nodes that can provide redundancy during the upgrade process. The LCM documentation specifies that firmware upgrades require node evacuation and rolling upgrade sequencing so that workloads remain available. A single-node cluster does not have node-level redundancy and therefore cannot support firmware upgrade operations that require putting a node into maintenance automatically. The guidance clearly states that "firmware upgrades are not supported for single-node clusters because the host cannot be safely placed into a maintenance mode during the LCM workflow." LCM is supported for software inventory, but not for firmware activation on single-node clusters. This explains why no firmware updates appear in the LCM interface.
NEW QUESTION # 25
An administrator wants to live-migrate a vGPU-enabled VM from one host to another within the same cluster.
What requirements must be met before initiating the migration?
- A. The host affinity for the VM must be to a host.
- B. The vGPU profile needs to be changed.
- C. The target host has sufficient resources to support the VM.
- D. The VM must be configured as an agent VM.
Answer: C
Explanation:
The Nutanix AHV virtualization guide explains that vGPU-enabled VMs can be live migrated only when the destination host contains compatible GPU hardware and has available vGPU capacity matching the profile assigned to the VM. The documentation states that the VM must have "adequate and equivalent GPU resources on the target host" for migration to proceed. Host affinity is a limiting factor and not a requirement.
Agent VMs are not designed to be migrated. Changing the vGPU profile is not necessary as long as the target host supports the currently assigned profile. Therefore, ensuring the destination host has sufficient compatible resources is the required condition.
NEW QUESTION # 26
After upgradingPrism Central from PC2022.1 to PC2024.1, an administrator isunable to log inwith theirIAM domain account.
What is the first troubleshooting step the administrator should take?
- A. Ping the Domain Controller from the CVM.
- B. Ensure port 9441 is open in the firewall.
- C. Log in with a local admin account.
- D. Validate the trusted signing certificate of the organization.
Answer: C
Explanation:
After a Prism Central upgrade, IAM authentication settings may require reconfiguration.
* Option D (Log in with a local admin account) is correct:
* If IAM authentication fails, thelocal admin account must be usedto check domain settings.
* Option A (Ping the Domain Controller) is incorrect:
* Network connectivity is important, but theissue is likely related to IAM settings, not network reachability.
* Option B (Check firewall port 9441) is incorrect:
* Port 9441 is used forSSO authentication, butport issues usually result in login delays, not complete failures.
* Option C (Validate signing certificate) is incorrect:
* While certificates can cause issues,local admin login should always work.
References:
Nutanix KB #Troubleshooting IAM Login Issues After a Prism Central Upgrade Nutanix Documentation #Managing User Authentication and IAM Integration
NEW QUESTION # 27
In Prism Element, how many nodes can be placed into maintenance mode at one time on 12-node FT2 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
In a 12-node FT2 cluster, onlyonenode can be placed into maintenance mode at a time. This ensures that the cluster maintains data redundancy and protection (FT2 indicates 2-failure tolerance).
From theNutanix Enterprise Cloud Administration (ECA)course materials:
"For FT2 clusters, a maximum of one node can be placed in maintenance mode at a time to ensure the cluster' s ability to tolerate failures and maintain quorum."
NEW QUESTION # 28
An administrator attempted toenable Data-in-Transit Encryptionon aScale-Out Prism Central clusterto encrypt service-level traffic between nodes. However, the featuredid not work correctly due to a firewall restriction.
Which CVM-specific port should be allowed through the firewall for Data-in-Transit Encryption?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Data-in-Transit Encryption in Nutanix requires inter-node communication over specific CVM ports.
* Option A (Port 2009) is correct:
* Port2009 is used for Data-in-Transit Encryption between Nutanix CVMs.
* Firewall rules must allow traffic on this portto enable secure encrypted communication.
* Option B (Port 2010) is incorrect:
* Port2010 is used for CVM-to-CVM communication but does not handle encryption.
* Option C (Port 2020) is incorrect:
* This port is used forAcropolis File Services (AFS), not encryption.
* Option D (Port 9440) is incorrect:
* Port9440 is used for Prism Central web access, not internal CVM encryption.
References:
* Nutanix Security Guide#Data-at-Rest vs. Data-in-Transit Encryption
* Nutanix KB#Firewall Port Requirements for Secure Cluster Communication
NEW QUESTION # 29
What is the best way to automate the deployment of 100 Linux VMs with similar configurations but different hostnames, local configurations, and install packages?
- A. Manual configuration
- B. SysPrep Configuration
- C. Cloud-Init configuration
- D. VM template configuration
Answer: C
Explanation:
To automate the deployment of a large number of Linux VMs (such as 100), each with similar base configurations but unique hostnames, local configurations, and additional package installations,Cloud-Initis the most appropriate approach. Cloud-Init is a widely supported industry-standard tool for automating the initialization and configuration of Linux instances at first boot.
From theNutanix Enterprise Cloud Administration (ECA)course materials:
"Cloud-Init is the recommended method for configuring Linux virtual machines during deployment in Prism Central. It allows administrators to inject configuration scripts and user data that customize the VM at boot time, including hostname, network settings, user creation, and package installations." Specifically:
"Using Cloud-Init, you can create a template or base image for the Linux VMs and then customize each VM deployment by passing individualized configuration parameters, ensuring that while the base configuration remains consistent, each VM has unique settings such as hostname or installed software." This method is far superior to manual configuration, which is impractical for 100 VMs, and it's not suitable to use SysPrep (which is for Windows-based customization). VM templates alone would provide only the base image; they do not address unique per-VM settings.
Therefore,Cloud-Initensures a repeatable, scalable, and fully automated deployment process that aligns with the Nutanix best practices for deploying large numbers of Linux VMs with unique configurations.
NEW QUESTION # 30
Refer to the Exhibit:
An administrator needs to create two virtual machines: VM4 and VM5 that leverage the memory over-commit feature.
Once VM4 is created and running, the administrator notices that it uses only 28GB of RAM.
What will be the maximum RAM that can be allocated to VM5 so that it can be powered on?
- A. 8GB
- B. 32GB
- C. 16GB
- D. 4GB
Answer: A
Explanation:
Understanding the Exhibit & Memory Allocation
* Thehost has 128GB of physical RAM.
* Thecurrent memory allocationacrossthree VMs (VM1, VM2, VM3) is 128GB, but only92GB is actually utilized.
* This means there is36GB of unutilized memory available for allocation.
Step-by-Step Breakdown
* Existing Memory Usage Before Adding VM4
* Total Physical RAM:128GB
* Used by running VMs (VM1, VM2, VM3):92GB
* Unutilized Memory Available:36GB
* After Creating and Running VM4
* VM4 is allocatedmemory but only utilizes 28GB.
* The table does not show VM4's allocated RAM, but assuming it was given a reasonable allocation, it must have been taken from the36GB unutilized memory pool.
* IfVM4 uses 28GB, theremaining unutilized memory is now (36GB - 28GB) = 8GB.
* Maximum Memory Allocation for VM5
* Sinceonly 8GB remains unutilized, the maximum memory VM5 can be allocated while still allowing it to power on is8GB.
Evaluating the Answer Choices
* (A) 4GB#(Incorrect)
* More memory (8GB) is available, so limiting to 4GB is unnecessary.
* (B) 8GB#(Correct)
* Theremaining unutilized memory after VM4 is 8GB, so VM5 can be allocated up to8GBwhile ensuring it can power on.
* (C) 16GB#(Incorrect)
* Only8GB is left, so 16GB isnot possible.
* (D) 32GB#(Incorrect)
* There isnot enough unutilized memoryto allocate 32GB.
Key Concept: Nutanix Memory Overcommit
* Nutanix AHV supportsmemory overcommit, meaning VMs can be allocated more memory than physically available usingmemory ballooning and swapping.
* However,to power on VM5 without impacting performance, it must fit within the available unutilized memory, which is8GB.
NEW QUESTION # 31
What happens when a VM is associated with multiple VM-Host affinity policies?
- A. The newest policy takes precedence.
- B. The VM is automatically removed from all policies.
- C. All policies are applied simultaneously.
- D. The oldest policy is applied
Answer: A
NEW QUESTION # 32
An administrator has been tasked with developing a Prism Central Recovery Plan for 50 workloads that will be assigned new IP addresses and will need to utilize a new DNS server upon instantiation of workloads in the Disaster Recovery (DR) location.
What is the best way to accomplish this?
- A. Install Nutanix Guest Tools, this will allow Re-IP and automatically assign updated DNS server(s).
- B. Update DNS settings on production VMs prior to execution of Recovery Plan.
- C. Enable scripting within Recovery Sequence & utilize custom script per VM.
- D. Utilize recovery Plan to bring VMs online at DR and then manually login to each VM and update IP
/DNS.
Answer: C
Explanation:
For workloads requiring new IP addresses and DNS server settings during DR recovery, using custom scripting within the Recovery Plan is the recommended and supported method.
From theNutanix Enterprise Cloud Administration (ECA)course materials:
"Recovery Plans support scripting within the Recovery Sequence to enable administrators to perform post- recovery customization tasks, such as updating IP addresses, configuring DNS, or applying application- specific settings."
"This scripting capability provides a flexible, automated approach to ensure that VMs are correctly reconfigured to operate within the DR environment's network and DNS settings." This avoids the need for manual reconfiguration post-recovery or adjusting settings in production prior to failover.
NEW QUESTION # 33
In ascale-out Prism Central deployment, what additional functionality does configuring anFQDN instead of a Virtual IPprovide?
- A. Load balancing
- B. Segmentation
- C. SSL Certificate
- D. Resiliency
Answer: A
Explanation:
In a scale-out Prism Central deployment, using an FQDN (Fully Qualified Domain Name) enables load balancing across multiple Prism Central instances.
* Option A (Load balancing) is correct:
* When anFQDN is used, Nutanixautomatically distributes trafficbetween multiple Prism Central nodes, improving performance.
* Option B (Resiliency) is incorrect:
* Resiliency is achieved throughcluster redundancy, not by using an FQDN.
* Option C (Segmentation) is incorrect:
* Segmentationrelates to network isolationrather than FQDN-based load balancing.
* Option D (SSL Certificate) is incorrect:
* SSL certificatescan be applied to both FQDN and Virtual IP configurations.
References:
* Nutanix Prism Central Guide #Configuring Scale-Out Deployment
* Nutanix KB #How FQDN Enhances Load Balancing in Scale-Out Prism Central
NEW QUESTION # 34
Per organizational requirements, an administrator has uploaded a signed SSL certificate to Prism for Common Access Card (CAC) authentication.
Once the certificate has been uploaded successfully, the certificate appears to be valid but CAC authentication is not functional.
What is a potential cause of this problem?
- A. RSA key size is incorrect.
- B. Online Certificate Status Protocol (OCSP) is not enabled.
- C. Signature Algorithm is incorrect.
- D. There is no Certificate Revocation List (CRL) configured.
Answer: D
NEW QUESTION # 35
What guest customization options are available when creating a VM template?
- A. Cloud-init
- B. Guided Script
- C. Sysprep
- D. Custom Script
Answer: A,C
Explanation:
When creating templates in Nutanix, Prism Central supports two official, built-in guest customization frameworks depending on the operating system family.
The Nutanix guest customization documentation states:
"For Windows VMs, Prism Central supports Sysprep-based customization. For Linux VMs, Prism Central supports Cloud-init customization." These two tools allow automation of hostname assignment, networking configuration, user accounts, and post- deployment initialization.
Additional extracts from internal documentation:
* "Sysprep is automatically invoked during clone operations from Windows templates to ensure that the cloned VM receives unique identifiers."
* "Cloud-init is used for Linux templates to allow dynamic provisioning, SSH key injection, and package installation during instantiation." Nutanix does not list "Custom Script" or "Guided Script" as valid VM template customization mechanisms.
Scripting can be applied after deployment but not as a built-in template customization framework.
Thus, the only valid template customization options are Sysprep and Cloud-init.
NEW QUESTION # 36
Which predefined view should be leveraged in Prism Central Intelligent Operations to determine which VM is consuming too many resources and causing other VMs to starve?
- A. Overprovisioned VMs List
- B. Bully VMs List
- C. Inactive VMs List
- D. Constrained VMs List
Answer: B
Explanation:
TheBully VMs Listview in Prism Central'sIntelligent Operationsidentifies VMs that are consumingexcessive resources(CPU, memory, or storage IO) and causing resource starvation for other VMs.
From theNutanix ECA documentation:
"Bully VMs List identifies virtual machines with high resource consumption, enabling administrators to investigate and take action to prevent performance degradation in other VMs." The other options:
* A (Constrained VMs): Shows VMs that are being starved of resources.
* C (Inactive VMs): Shows VMs that are using little to no resources.
* D (Overprovisioned VMs): Shows VMs with allocated resources beyond actual usage.
NEW QUESTION # 37
......
NCP-MCI-6.10 Free Study Guide! with New Questions: https://certblaster.prep4away.com/Nutanix-certification/braindumps.NCP-MCI-6.10.ete.file.html