A wide audience

For example, if you are a college student, you can learn and use online resources through the student learning platform over the study materials. On the other hand, the GB0-371-ENU study engine are for an office worker, free profession personnel have different learning arrangement, such extensive audience greatly improved the core competitiveness of our products, to provide users with better suited to their specific circumstances of high quality learning resources, according to their aptitude, on-demand, maximum play to the role of the GB0-371-ENU exam questions.

Firmly believe in an idea, the GB0-371-ENU exam questions are as long as the user to follow our steps, follow our curriculum requirements, users can be good to achieve their goals, to obtain the qualification certificate of the target. Below, I will introduce the GB0-371-ENU training materials to you from three main aspects, so that you can understand the study materials more deeply.

DOWNLOAD DEMO

Effectively improve the user's speed

There are two big in the GB0-371-ENU exam questions -- software and online learning mode, these two models can realize the user to carry on the simulation study on the study materials, fully in accordance with the true real exam simulation, as well as the perfect timing system, at the end of the test is about to remind users to speed up the speed to solve the problem, the GB0-371-ENU training materials let users for their own time to control has a more profound practical experience, thus effectively and perfectly improve user efficiency to solve the problem in practice, let them do it keep up on exams.

Highlight key memory methods

The study materials are in the process of human memory, is found that the validity of the memory used by the memory method and using memory mode decision, therefore, the GB0-371-ENU training materials in the process of examination knowledge teaching and summarizing, use for outstanding education methods with emphasis, allow the user to create a chain of memory, the knowledge is more stronger in my mind for a long time by our GB0-371-ENU study engine.

H3C GB0-371-ENU Exam Syllabus Topics:

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. The multicast IP address is 229.130.130.1, and the corresponding mac address is:

2. Before configuring Layer 3 multicast, the first configuration that needs to be done is

A) Configure PIM protocol
B) SB sets the IGMpi protocol version
C) Enter IGMP view
D) Enable multicast globally through the multicastrouting-enable command

3. In the networking shown in the figure, the interconnection lines between RT1, RT2, RT3 and RT4 are all 1000Mbps links except for the 10Mbps link sharing the Ethernet part, and the four routers run OSPF protocol to make the routing interoperable. The PIMSM protocol is running between them, and the RP is 1.1.1.1. There are receivers on the downstream interfaces of RT1 and RT2, and IGMP is enabled on the corresponding interfaces. Then, when the receiver (Received) sends a group join request, which of the following routers exist (*, G) table entry

A) RT3
B) RT1
C) RT2
D) RT4

4. The customer's two switches SWA and SWB are connected together through a LAN. The two switches SWA and SWB form a link aggregation group. Check the aggregation group status on the SWA as follows:
[SWA]display link-aggregation verbose
Loadsharing Type: Shar - Loadsharing, NonS - Non-Loadsharing
Port Status: S - Selected, U - Unselected
Flags: A - LACP_Activity, B - LACP_Timeout, C - Aggregation,
D - Synchronization, E - Collecting, F - Distributing,
G - Defaulted, H - Expired
System ID: 0x8000, 000f-e245-6bc0
Local:
Port StatusPriority Oper-KeyFlag
GE1/0/1S 327682 {ACDEF}KOKOMADE
GE1/0/2S 327682 {ACDEF}KOKOMADE
GE1/0/3S 327682 {ACDEF}KOKOMADE
Remote:
ActorPartner Priority Oper-KeySystemID Flag
GE1/0/125327682 0x8000, 000f-e23d-59f0 {ACDEF}KOKOMADE
GE1/0/226327682 0x8000 000f-e23d-59f0 {ACDEF}KOKOMADE
GE1/0/327327682 0x8000 000f-e23d-59f0 {ACDEF}KOKOMADE
It can be known from the above information

A) The dynamic aggregation group is established between the switch SWA and the switch SWB
B) The static aggregation group is established between the switch SWA and the switch SWB
C) Link aggregation port bandwidth size 2G
D) LACP priority is 0x8001

5. The customer LAN switches SWA, SWB, SWC, and SWD form an RRPP ring, the main ring 1. The switch SWD is connected to the switches SWB and SWC, but not to the switch SWA. The switch SWD has the following configuration information:
[SWD]rrpp domain 1
[SWD-rrpp-domain 1 ]ring 1 node-mode transit primary-port gigabitethernet 2/0/1 secondary-port gigabitethernet 2/0/2 level 0
If the switch SWA is the master node of primary ring 1, if the switch SWD port GigabitEthem1/0/ fails, you can know from the above information

A) If the switch SWD finds that the Gigabit port of the port is Up again, it will immediately unblock the port
B) The switch SWA immediately switches the state to the Failed state and releases the secondary port
C) SWA will send Link-Down messages to notify all nodes
D) The switch SWC immediately switches the state to the Failed state and releases the secondary port

Solutions: